Maintenance Details Of The Hammer Crusher

Hammer crushers are often used as secondary crusher equipment for mining machinery in various crushing production lines, mainly used in mines, highway construction, construction, water conservancy and hydropower. Because of its simple structure, large crushing ratio and high production efficiency, it is widely used. When the hammer crusher is working, the motor drives the rotor to rotate at a high speed, and the material evenly enters the crusher cavity. The high-speed rotary hammer impacts, shears, and tears the material to cause the material to be broken. However, even the best equipment, if not maintained, frequent failures, will affect normal production, so equipment maintenance and maintenance issues become a top priority. Next, I will give you a detailed description of the maintenance details of the hammer crusher

Maintenance Details Of The Hammer Crusher

Maintenance of hammer crusher

Regular inspection: Regularly check whether the parts of the equipment are loose. If it is loose, it should be tightened in time; check the use of wearing parts such as hammer head and lining board regularly. If problems are found, they should be dealt with in time. This will extend the life of the machine and reduce the cost of maintenance.

Keep the lubrication system in good condition: Always look at the lubrication situation. The temperature of the rotor bearing should be kept below 60 буC, and the temperature should not exceed 70 буC. If overheating is found, the cause should be identified and measures should be taken to eliminate it. In addition, lubrication materials should be selected according to different requirements. Some bearings need to add lubricating oil, and some may require the addition of grease. This should be selected according to requirements.

Keep the equipment clean: During normal maintenance, care should be taken to protect the surface of the precision mating parts to prevent dust contamination and damage. If the hammer crusher has a long storage time outside, it is better to apply oil or rust inhibitor on the surface to prevent rust and affect normal work.

Maintenance details during loading and unloading: When loading or unloading the parts of the hammer crusher, there must be copper rods or corresponding blocks. It is not allowed to directly strike with a hammer to prevent damage and cracks. If the bearing of the hammer crusher is damaged, it is better to replace the two bearings at the same time. If only one of them is replaced, it should be completely removed and cleaned before being installed.

The reasonable maintenance and maintenance of the hammer crusher will make the work more effective. It not only can extend the service life of the hammer crusher, but also create a greater economic benefit to the customer. Therefore, when using a hammer crusher. First, you should understand its instructions for use, how to maintain it, and how to operate safely for your own safety and for the future development of the company.

Related Machine: